What length of motorized camera slider
Camera Slides are often used in many shooting work, the use of the camera
only needs to be installed on the slide, you can ensure that the mobile shooting
to maintain the stability of the screen, does not appear when the hand-held
screen will be partial bias for a while . The following brief introduction of
the slide in the filming role:
First of all, according to the law of portrait photography, arc-shaped orbit is used to solve the problem of small (far smaller) deformation of large (large) images on the middle of the linear slide, especially when the enlargement is larger, Into double, resulting in waste film;
Sevenoak Motorized Camera Slider SK-MTS100
Overall Size: 126*26*19cm
Working distance: 80cm
Horizontal max load capacity: 10kg
Vertical max load capacity: 4kg
Power supply: 12V
Working temperature: -200-600C
Power supply: 12V/5A AC adapter or power pack which
2. Camera slider can be close-range shooting 1.5 m (nearly) ~ 2.5 m (medium) ~ 5 m (far) to meet the actual human eye close simulation, restore a sense of realism and intimacy without distortion. Straight-line slide can only shoot long-distance (2.5 meters) close only by reducing the travel distance before and after the object to maintain the three-dimensional parallax, so the linear slide regardless of distance, can only produce a sense of hierarchy, but can not produce a sense of reality, This is why the portrait made by the linear slide is like a layer of plane feeling;
3. Adjustable speed As the studio with a professional digital camera shooting speed, from 1.5 / sec ~ 8 / sec, or even higher, so the speed of the slide rail must be adjustable to adapt to the camera's shooting speed, slide with Promise Speed External dial to adjust the speed to adapt to different camera's continuous shooting speed
1. The rail assembly should meet the requirements of this standard and be manufactured according to the product drawings and technical documents approved by the prescribed procedures.
2. Parts of the outer surface should be smooth, non-invasive sharp edges, burrs, no scars, cracks and other defects.
3 Riveting and welding parts should be solid and reliable, no loose phenomenon, the welding parts should be smooth.
4 rail assembly in the operation without abnormal noise occurs.
5 parts surface should be appropriate anti-corrosion rust treatment or corrosion-resistant materials.
6 The sliding surface should be applied a suitable amount of grease.
More information about sevenoak camera stabilizer,camera slider
First of all, according to the law of portrait photography, arc-shaped orbit is used to solve the problem of small (far smaller) deformation of large (large) images on the middle of the linear slide, especially when the enlargement is larger, Into double, resulting in waste film;
Sevenoak Motorized Camera Slider SK-MTS100
Overall Size: 126*26*19cm
Working distance: 80cm
Horizontal max load capacity: 10kg
Vertical max load capacity: 4kg
Power supply: 12V
Working temperature: -200-600C
Power supply: 12V/5A AC adapter or power pack which
2. Camera slider can be close-range shooting 1.5 m (nearly) ~ 2.5 m (medium) ~ 5 m (far) to meet the actual human eye close simulation, restore a sense of realism and intimacy without distortion. Straight-line slide can only shoot long-distance (2.5 meters) close only by reducing the travel distance before and after the object to maintain the three-dimensional parallax, so the linear slide regardless of distance, can only produce a sense of hierarchy, but can not produce a sense of reality, This is why the portrait made by the linear slide is like a layer of plane feeling;
3. Adjustable speed As the studio with a professional digital camera shooting speed, from 1.5 / sec ~ 8 / sec, or even higher, so the speed of the slide rail must be adjustable to adapt to the camera's shooting speed, slide with Promise Speed External dial to adjust the speed to adapt to different camera's continuous shooting speed
1. The rail assembly should meet the requirements of this standard and be manufactured according to the product drawings and technical documents approved by the prescribed procedures.
2. Parts of the outer surface should be smooth, non-invasive sharp edges, burrs, no scars, cracks and other defects.
3 Riveting and welding parts should be solid and reliable, no loose phenomenon, the welding parts should be smooth.
4 rail assembly in the operation without abnormal noise occurs.
5 parts surface should be appropriate anti-corrosion rust treatment or corrosion-resistant materials.
6 The sliding surface should be applied a suitable amount of grease.
More information about sevenoak camera stabilizer,camera slider
评论
发表评论